Image Placeholder

The statements, analyses, calculations or any other support assistance that you have received are based on information provided by you, or on behalf of you, to Selectronic Australia Pty Ltd, usually via the Selectronic Support team, and shall be used as general information only.

As the Selectronic support team does not have a complete insight into, nor control over, the correctness of the data provided, the use of the advice or calculations by others, the project specific conditions, or the proper application of the products in accordance with the applicable installation guidelines and accepted practices, the statements provided herein shall not be relied upon for any specific application without independent verification and assessment of suitability by the project’s engineer of record, or another party acting in a similar capacity, as stipulated by the authority having jurisdiction or other applicable contractual regulations. Project specific conditions include, but are not limited to, system performance requirements as related to the system design, system installation execution requirements, appropriate detailing requirements, specific regulatory requirements, balance of system component properties and quality control associated therewith, specific installation conditions that may affect system operation, the nature and configuration of other components attached, or with impact to power quality, desired power availability, system application or project.

Therefore, while hypotheses used in these statements, preliminary advice, or calculations are based on sound and established principles, they shall not be deemed as instruction for any specific application or project without subsequent independent analysis, evaluation, verification and assessment of appropriateness for such an application by the design engineer or other responsible party of the project, since Selectronic Australia Pty Ltd is not, nor can it be considered as, providing this service.

Based on the preceding, Selectronic Australia Pty Ltd hereby declines any liability whatsoever for losses and/or damages of whatever kind (and sustained by whomever) that might result from the above.

The official text of the disclaimer is its English version, as provided above. Any discrepancies or differences created in the translation shall not be considered binding nor having legal effect for compliance, implication of liability or enforcement purposes.

Additional Information:

Visit the Selectronic: Knowledge Base or contact Selectronic via the Customer Portal.